National Match Grade replacement barrels for the Taurus PT92 and PT99. Outstanding accuracy improvements with both lead and jacketed bullets. Precision machined from 4140 gun barrel certified material. Over-sized on the breech face to remove all front and rear barrel play. Available in standard factory length, extended lengths, threaded or ported. O-Ring installed on barrel threads to secure thread protector when firing.
TAURUS PT99 THREADED BARREL
FITTING SERVICES FOR THE TAURUS PT99: $60.00
For instructions on sending your pistol, please click here. Please note that free shipping does not apply for the shipment of firearms.
Fitting for the Taurus PT99 requires entire pistol.
BARREL THREADING INFORMATION:
We thread barrels only after the barrel has been ordered and approximately every 1-2 weeks. Barrels are threaded with thread information given us by the purchaser. Once the barrel has been threaded, it cannot be changed or canceled. Barrel threading specs listed under “threading options” include common threads used for suppressors and other barrel attachments. If unsure of thread, contact the manufacturer of your barrel attachment or contact us at (406) 625-2562. You may call us for advice, we have threading information from most silencer manufacturers. All threaded barrels ship with one thread protector at no charge (1/2-32, 1/2-36 excluded).
Locking block/plunger can be used from your factory barrel.
Installation of new locking block & plunger $45.00
NOTE: BECAUSE ALL IN STOCK BARRELS ARE CUT, CROWNED, THREADED (IF APPLICABLE), AND FINISH APPLIED TO THE CUSTOMERS ORDER SPECIFICATIONS PLEASE ALLOW 1-2 WEEKS FOR SHIPPING.
We now offer custom PVD finish options. Our Taurus PT92 and PT99 barrels are now available in our standard black finish as well as silver and copper PVD coatings. PVD (Physical Vapor Deposition) coatings are an extremely hard coating that offer aesthetically pleasing colors and increased lubricity. Our CrN PVD coating is a silver finish similar to that of stainless steel. Our TiCN PVD coating is a satin copper. For colors, please see images at the top of the page. PLEASE NOTE THAT PVD FINISHES ADD APPROXIMATELY 2-3 WEEKS TO LEAD TIME.
-Twist Rate: 1/16
-Rifling: Conventional, button rifled
-Material: 4140 Gun Barrel Certified Steel
-Hardness: 40-44 HRC
-Crown: Recessed 60 degree crown
-Thread Protector: Included at no charge (1/2-32, 1/2-36 excluded)
-Includes O-Ring on barrel threads to secure thread protector while shooting
Drop In, Fitted – Gun Must Be Sent In [Add $60.00]
Without Locking Block and Plunger, With Locking Block and Plunger [Add $45.00]
1/2-28, 1/2-32 [Add $15.00], 1/2-36 [Add $15.00], .575-40 [Add $13.00]