-Material: Carbon Steel
-Finish: Black, FDE, or Inox
-Weight: 3.5 oz
-Light Weight Recoil Spring
-Hex Key Wrench
INSTALLATION & FITTING:
This compensator attaches to your 4.9″ Beretta factory non-threaded barrel. The compensator is designed with the purpose of preventing the customer from being forced to purchase a threaded barrel in order to attach a comp. To install the compensator, we thread the portion of your factory 4.9″ barrel that extends past the slide. Once your factory barrel is threaded, we then remove material from the rear surface of the compensator until it references correctly with the slide and has no more than a .004″ gap between the compensator and slide. This is done to create an aesthetically pleasing appearance and also ensures that the slide is not making contact with the rear surface of the comp when the pistol goes into battery. Installation and fitting requires your slide and factory barrel to be sent in.
For instructions on sending in your slide and barrel, please click here.
This compensator will not attach to the Beretta factory 1/2-28 threaded barrel. For the 1/2-28 compensator that will attach directly to your factory threaded barrel click here.
For our .575-40 Compensator Kit that includes a Jarvis Match Grade Barrel, Compensator, and Steel Guide Rod click here.
This compensator is designed around the 92 FS/Vertec slides. It is not an exact profile match to any of the model A1 Beretta’s (92A1, M9A1, 96A1) or Brigadier slides. The compensator will, however, function on all Beretta 92, M9, and 96 slides.
This compensator must be used with the reduced power recoil spring provided with the compensator.