-Material: 7075-T6 Aluminum
-Finish: Type 3 Black Hardcoat Anodize
-Single Large Port
-Set Screws (1 Extra, 2 Total)
-Threadlocker (To Be Used on Set Screw Threads)
-Hex Key Wrench
-Reference Flat on Customer’s Barrel Threads
To install, simply screw the compensator on and tighten the single set screw located at the bottom of the comp with the hex key wrench provided, no other tools required. Use a small amount of the Loctite provided on the set screw threads.
It is recommended that the Loctite be allowed to cure for 24 hrs before use.
*A flat must be put on the bottom of the barrel threads. This is to provide an easy reference for the set screw that aligns the compensator with the slide and also prevents the set screw from marring the barrel threads. This service is provided by us free of charge with the purchase of the compensator. If you are ordering a Jarvis threaded barrel with the compensator, the barrel will come with the set screw flat. If you already have a threaded barrel, you may send your barrel in after the order is placed. For shipping instructions click here. Your threaded barrel will then be shipped back to you with the compensator (free shipping still applies). If you have any questions regarding the reference flat that we put on the barrel threads you may contact us at 406-625-2562 or via email at firstname.lastname@example.org.