BERETTA 92 / M9 MINI COMP

$179.00

The Jarvis Half Profile Compensator for the Beretta 92 and M9 Pistols offers a smaller alternative to the original two port Jarvis Compensator. With a sleek design, the compensator will reduce muzzle rise and allow you to get back on target quicker while making your gun look great. Works with the Beretta 92/M9, and 96 models and Taurus PT92/99, and PT101 models. Hex key wrench and lightweight recoil spring included.

*Attaches to barrel with a .575-40 thread. Requires a 4.9″ barrel to accommodate threads.

*Models with a captured recoil spring will require a Jarvis Steel Guide Rod as a lightweight recoil spring is required while shooting with the compensator attached.

Installation Options * 

Color * 

Caliber * 

SKU: comp-be-hp Category: Tags: , , ,

Description

SPECS:

-Length: 1.375″
-Material: Steel
-Finish: Black, FDE, or Brushed Stainless
-Weight: Approx 2 oz

INSTALLATION & FITTING:

The Jarvis Compensator for the Beretta M9, 92, and 96 series pistols is threaded with a .575-40 standard compensator thread.  The compensator was originally designed with the purpose of preventing the customer from being forced to purchase a threaded barrel in order to attach a comp.  To install the compensator, we simply thread the portion of your factory 4.9″ barrel that extends past the slide.  Once your factory barrel is threaded, we then remove material from the rear surface of the compensator until it references correctly with the slide and has no more than a .004″ gap between the compensator and slide.  This is done to create an aesthetically pleasing appearance and also ensures that the slide is not making contact with the rear surface of the comp when the pistol goes into battery.  Installation and fitting requires your slide and factory barrel to be sent in.

For instructions on sending in your slide and barrel, please click here.

BERETTA M9A3:

The new Beretta M9A3 ships with a 1/2-28 threaded factory barrel.  Due to the compensator being threaded .575-40, it will not attach to the factory threaded barrel.  The Compensator Kit is currently required for the M9A3.  The Compensator Kit includes a Jarvis match grade barrel that is threaded .575-40, compensator, steel guide rod and light weight recoil spring.  Fitting is included at no charge with the Compensator Kit.

ADDITIONAL INFO:

This compensator must be used with the reduced power recoil spring provided with the compensator.

Additional information

Installation Options

Installed By Customer, Installed By Us – Included Barrel Threading & Compensator Fitting (Slide & Barrel Must Be Sent In) [Add $99.00]

Color

Black, Flat Dark Earth (Tan) [Add $30.00]

Caliber

9MM (Models 92, M9, PT92, PT99), .40 S&W (Models 96, PT101)

Reviews

There are no reviews yet.

Be the first to review “BERETTA 92 / M9 MINI COMP”

Your email address will not be published. Required fields are marked *